What should be paid attention to when using plasma cleaning machine

Plasma cleaner, also known as plasma surface treatment instrument, is a new high-tech technology, using plasma to achieve the effect that conventional cleaning methods cannot achieve. Plasma is a state of matter, also known as the fourth state of matter. Applying enough energy to the gas to dissociate it becomes a plasma state. The "active" components of plasma include: ion, electron, active group, excited nuclide (metastable state), photon, etc. Plasma cleaning machine is to use the properties of these active components to treat the sample surface, so as to achieve the purpose of cleaning. Plasma cleaning machine can be used for cleaning, etching, activation and surface preparation. Three kinds of RF generators, 40KHz, 13.56MHz and 2.45GHz, can be selected to meet the needs of different cleaning efficiency and cleaning effect. Plasma, like solid, liquid or gas, is a state of matter, also known as the fourth state of matter. Applying enough energy to the gas to dissociate it becomes a plasma state. The "active" components of plasma include: ion, electron, active group, excited nuclide (metastable state), photon, etc. Plasma surface treatment instrument is to use the properties of these active components to treat the sample surface, so as to achieve the purposes of cleaning, modification, photoresist ashing, etc. What should be paid attention to when the plasma cleaning machine is running? Let's talk about it from Nanjing Shifeng Technology:

1. Set the operation parameters of the plasma equipment correctly, and execute the operation instructions on time;

2. Protect the ignition device of the plasma to ensure the normal startup of the plasma cleaner;

3. For the preparation of plasma equipment before start-up, relevant personnel shall be trained, and at the same time, the personnel who operate the plasma cleaning machine shall be able to strictly perform various operations according to the requirements;

4. When the primary air duct is not ventilated, the operation time of the plasma generator shall not exceed the time required in the equipment manual to prevent burning out the burner and causing unnecessary loss;

5. If you need to maintain the plasma equipment, please cut off the power of the plasma generator and carry out the corresponding operation.

Plasma treatment equipment is widely used in plasma cleaning, etching, plasma plating, plasma coating, plasma ashing and surface modification. Through the treatment, the wettability of the material surface can be improved, and a variety of materials can be coated, plated and other operations, so as to enhance the adhesion and bond force, and remove organic pollutants, oil or grease at the same time. Well, I hope the above introduction can help you!